K10 Tungsten Carbide Rods Ground/Un-Ground Cutting Tool
|Purchase Qty. (Pieces)||FOB Price|
|20-999||US $10 / Piece|
|1,000+||US $1 / Piece|
Carbide Rods Decription& Application
Tungsten carbide rods are produced as standard with straight or twisted to a 30 or 40 degree helix and with 1,2,3 holes, or solid without holes.
Tungsten carbide rods are widely used in drills and end mills .Carbide grade YG10X is special for non ferrous precision cutting carbide grade YG6X is for wood cutting. Grade YG8X is fiber glass reinforced plastic.
The tungsten carbide solid round rods we produced are with good high hardness and precision, with super high wear resistant and impact-resistant. Our carbide rods are also with excellent performance in some sticky metal cutting which needs good shock and bending resistance.
Carbide Rods Application:
Tungsten carbide rods are often applied in various kinds of drills ,drill bits, micro drills, carbide end mills and reamers, mold punches, core pins and hole drills tools.
|TX Grade||Grade||ISO Grade||Hardness||Density||Bending Strength||Recommended Application|
|T100X||YG6X||K10-K15||91-93||14.8-15||≥1600||Suitable for little stress conditions, produce for small diameter steel wire, non-ferrous metal wire or rod.|
|T100||YG6||K10-K20||90.5-92||14.8-15||≥2000||Suitable for large stress conditions, produce for medium diameter of steel wire, non-ferrous metal wire or rod.|
|T200||YG8||K20-K30||89.5-91||14.6-14.8||≥2100||Suitable for steel, non-ferrous metal and alloy rod and tube,and is suitable for manufacturing machinery parts, tools materials and wear parts|
|T200C||YG8C||K20-K30||89-90.5||14.6-14.8||≥2200||Coarse grain size carbide,suitbale for drilling medium hard or hard stratum with f less than 14th and the coal bed containing hard rock;Coal Cutter Bits;Oil Field Bits,and Hammer Drill bits.|
|T300||YG9||K20-K30||87.5-89||14.3-14.5||≥2200||With good good resistance, impact resistance and good shock resistance, suitable for carbide drills, drill pills.|
|T300C||YG9C||K20-K30||87.2-88.6||14.4-14.6||≥2300||Coarse grain, with good wear resistance, suitable for drilling hard rock.|
|T400||YG10||K20-K30||87-88.5||14.3-14.6||≥2300||With good abrasion resistance, excellent impact resistance and good shock resistance, suitable for cemented carbide buttons and flat-tio-serrated compacts.|
|T500||YG11||K30-K40||89-90.2||14.2-14.5||≥2300||With good wear resistance, suitable for producing nail making moulds,nails specially for cement industry|
|T500C||YG11C||K30-K40||86.5-88||14.2-14.5||≥2400||Coarse grain, with good wear resistance, suitable for drilling hard rock.|
|T600||YG12||K30-K40||86.5-88||14.1-14.4||≥2400||With good toughness, suitable for making steel pipe, steel, non-ferrous metal and alloy rods, bars,tubes|
|T700||YG15||K40||87-88.5||13.9-14.2||≥2400||Low wear resistance, high bending strength and impact toughness. Suitable for cemented carbide dies,stamp dies and mould cores,etc.|
|T700C||YG15C||K40||85-86.5||13.9-14.2||≥2450||With very good impact and shock resistance,suitable for tungsten carbide dies and mould cores,etc.|
|T800||YG20||83-85||13.4-13.6||≥2700||Suitable for wear parts, plates and mechanical parts.|
|T800C||YG20C||82.5-84.5||13.4-13.6||≥2700||Suitable for cold heading moulds,cold punching moulds and cold rolls for standard parts and tools in various industries.|
|TN100||YN6||90.5-92.5||14.8-15.1||≥1700||With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.|
|TN200||YN7||90-92||14.7-14.9||≥1800||With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.|
|TN300||YN10||86-88||14.3-14.6||≥2000||With good corrosion resistant,suitable wear resistance.|
|TX35T||93-95||7.9-8.1||≥1700||With good corrosion resistant,suitable wear resistance.|
|Tungsten carbide rods|
1.100% raw material
2.trial order accept
3.finished and blanks available