Tungsten Carbide Rings
|Purchase Qty. (Pieces)||FOB Price|
|5-499||US $6 / Piece|
|500+||US $3 / Piece|
Cemented carbide is the best material for seal face rings.One of main reasons for using Tungsten Carbide is the additional wear resistance that can be achieved in both moving and static parts.This is particular the case in serve service conditions, such as high temperature,and high levels of corrosion and abrasion.
Carbide seal rings are widely used as seal faces in pump and seal, compressors and agitators. It is widely used in Oil Refineries, petrochemical industries, Fertilizer Plants,Petrochemical plants, Pharmaceutical industries.
All raw material are physically tested prior to machining .
|TX Grade||Grade||ISO Grade||Hardness||Density||Bending Strength||Recommended Application|
|T100X||YG6X||K10-K15||91-93||14.8-15||≥1600||Suitable for little stress conditions, produce for small diameter steel wire, non-ferrous metal wire or rod.|
|T100||YG6||K10-K20||90.5-92||14.8-15||≥2000||Suitable for large stress conditions, produce for medium diameter of steel wire, non-ferrous metal wire or rod.|
|T200||YG8||K20-K30||89.5-91||14.6-14.8||≥2100||Suitable for steel, non-ferrous metal and alloy rod and tube,and is suitable for manufacturing machinery parts, tools materials and wear parts|
|T200C||YG8C||K20-K30||89-90.5||14.6-14.8||≥2200||Coarse grain size carbide,suitbale for drilling medium hard or hard stratum with f less than 14th and the coal bed containing hard rock;Coal Cutter Bits;Oil Field Bits,and Hammer Drill bits.|
|T300||YG9||K20-K30||87.5-89||14.3-14.5||≥2200||With good good resistance, impact resistance and good shock resistance, suitable for carbide drills, drill pills.|
|T300C||YG9C||K20-K30||87.2-88.6||14.4-14.6||≥2300||Coarse grain, with good wear resistance, suitable for drilling hard rock.|
|T400||YG10||K20-K30||87-88.5||14.3-14.6||≥2300||With good abrasion resistance, excellent impact resistance and good shock resistance, suitable for cemented carbide buttons and flat-tio-serrated compacts.|
|T500||YG11||K30-K40||89-90.2||14.2-14.5||≥2300||With good wear resistance, suitable for producing nail making moulds,nails specially for cement industry|
|T500C||YG11C||K30-K40||86.5-88||14.2-14.5||≥2400||Coarse grain, with good wear resistance, suitable for drilling hard rock.|
|T600||YG12||K30-K40||86.5-88||14.1-14.4||≥2400||With good toughness, suitable for making steel pipe, steel, non-ferrous metal and alloy rods, bars,tubes|
|T700||YG15||K40||87-88.5||13.9-14.2||≥2400||Low wear resistance, high bending strength and impact toughness. Suitable for cemented carbide dies,stamp dies and mould cores,etc.|
|T700C||YG15C||K40||85-86.5||13.9-14.2||≥2450||With very good impact and shock resistance,suitable for tungsten carbide dies and mould cores,etc.|
|T800||YG20||83-85||13.4-13.6||≥2700||Suitable for wear parts, plates and mechanical parts.|
|T800C||YG20C||82.5-84.5||13.4-13.6||≥2700||Suitable for cold heading moulds,cold punching moulds and cold rolls for standard parts and tools in various industries.|
|TN100||YN6||90.5-92.5||14.8-15.1||≥1700||With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.|
|TN200||YN7||90-92||14.7-14.9||≥1800||With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.|
|TN300||YN10||86-88||14.3-14.6||≥2000||With good corrosion resistant,suitable wear resistance.|
|TX35T||93-95||7.9-8.1||≥1700||With good corrosion resistant,suitable wear resistance.|
1.100% raw material
2.trial order accept
3.finished and blanks available
Having excellent wear resistance, these carbide rings are available in different sizes and shapes to meet the varied requirements of our clients. The specification we can make is OD 10~ 300, ID 3~ 260 and H 8~ 150 mm.Either blanks or finished products can be provided.